Procurement of 1 simple and robust high temperature treatment tools making it possible to thermally parallelize quantities (8 times of 1 to 10 g in a single autonomous system) of heterogeneous solid catalysts under different gases and/or vapour before their catalytic evaluation. Heat treatments conventionally carried out in the laboratory: treatment of the catalysts in fixed bed where the gas is forced to go through the catalytic bed will therefore be preferred.
Temperature range: 100 to 750C
Gas feed: Air, N2, mix of air and N2, H2
Gas feed flow per 8 reactors: 8 to 200 NL/h +/-5 %
Liquid feed type: Water, chlorination compound (1,2-Dichloropropane), alcohol(propan-2-ol)
Liquid feed flow range for 8 reactors: 0,5 to 10g/h for all 8
Maximum dimensions of the tool: Deep < 900 mm, width < 2 800 mm, height < 3 000 mm
Maximum weight: 800 kg/m
Date limite
Le délai de réception des offres était de 2018-12-18.
L'appel d'offres a été publié le 2018-11-16.
Fournisseurs
Les fournisseurs suivants sont mentionnés dans les décisions d'attribution ou dans d'autres documents relatifs aux marchés publics :
Objet Champ d'application du marché
Titre:
“Procurement, Installation and Commissioning of a Parallezide (8 Reactors) Hight Throughout Heat Treatment Device
437577-18-TEC-SOL”
Produits/services: Fours industriels📦
Brève description:
“Procurement of 1 simple and robust high temperature treatment tools making it possible to thermally parallelize quantities (8 times of 1 to 10 g in a single...”
Brève description
Procurement of 1 simple and robust high temperature treatment tools making it possible to thermally parallelize quantities (8 times of 1 to 10 g in a single autonomous system) of heterogeneous solid catalysts under different gases and/or vapour before their catalytic evaluation. Heat treatments conventionally carried out in the laboratory: treatment of the catalysts in fixed bed where the gas is forced to go through the catalytic bed will therefore be preferred.
Temperature range: 100 to 750C
Gas feed: Air, N2, mix of air and N2, H2
Gas feed flow per 8 reactors: 8 to 200 NL/h +/-5 %
Liquid feed type: Water, chlorination compound (1,2-Dichloropropane), alcohol(propan-2-ol)
Liquid feed flow range for 8 reactors: 0,5 to 10g/h for all 8
Maximum dimensions of the tool: Deep < 900 mm, width < 2 800 mm, height < 3 000 mm
Maximum weight: 800 kg/m
1️⃣
Lieu d'exécution: Rhône🏙️
Site principal ou lieu d'exécution:
“IFP Energies nouvelles
Etablissement de Lyon Rond-point de l'échangeur de Solaize
BP 3
69360 Solaize
FRANCE”
Description du marché: Manufacturing, shipment, delivery, installation and commissioning.
Critères d'attribution
Le prix n'est pas le seul critère d'attribution et tous les critères ne sont énoncés que dans les documents de passation de marchés
Durée de l'accord
Date de début: 2019-04-22 📅
Date de fin: 2020-04-20 📅
Informations sur les limites du nombre de candidats à inviter
Nombre de candidats envisagé: 3
Informations sur les options
Options ✅
Description des options:
“1) An additional tool;
2) Individual reactor temp control: 1 set point per reactor (8 different set points);
3) High temperature range: 100 to 1000C;
4)...”
Description des options
1) An additional tool;
2) Individual reactor temp control: 1 set point per reactor (8 different set points);
3) High temperature range: 100 to 1000C;
4) Individual gas flow: 1 to 25 NL/h +/-5 %;
5) Small quantity of liquid in gas feed: to ensure the injection, the division into equal quantity and the vaporization: 3μL of a liquid in the gas feed for 2g of catalyst;
6) Liquid feed flow range #2 for 8 reactors: 10 to 50g/h for all 8.
Informations juridiques, économiques, financières et techniques Conditions de participation
Liste et brève description des conditions:
“1) Candidature letter — giving representative the right to act on behalf of their business partner (DC1);
2) Candidate's declaration as an individual or a...”
Liste et brève description des conditions
1) Candidature letter — giving representative the right to act on behalf of their business partner (DC1);
2) Candidate's declaration as an individual or a member of a group (DC2);
3) Documents concerning the powers of the person mandated to act on the candidate's behalf, if the signatory is not the legal representative;
4) A sworn declaration justifying that they do not fall under any of the cases set out in article 45 and 48 of Order (ordonnance) No. 2015-899 of 23.7.2015 concerning procurement contracts and, in particular, that they are in compliance with articles L. 5212-1 to L. 5212-11 of the French Labor Code concerning the employment of disabled workers;
5) A copy of any legal rulings, if the candidate is subject to ongoing legal proceedings.
Afficher plus Situation économique et financière
Liste et brève description des critères de sélection:
“— declaration of the candidate's overall turnover from the 2 most recent financial years available depending on the company's inauguration date or the start...”
Liste et brève description des critères de sélection
— declaration of the candidate's overall turnover from the 2 most recent financial years available depending on the company's inauguration date or the start of business, as far as this information on turnover is available,
— declaration of the candidate's turnover for the department or industry for which the procurement contract is being offered, focusing as much as possible on information from the 2 most recent financial years available depending on the company's inauguration date or the start of business, as far as this information on turnover is available,
— balance sheets or extracts from balance sheets for the last 2 years, from economic operators who are obliged by law to publish such balance sheets.
Afficher plus Capacité technique et professionnelle
Liste et brève description des critères de sélection:
“— a list of the work carried out over the last two years, together with proof of good completion for the most significant projects. These proof documents...”
Liste et brève description des critères de sélection
— a list of the work carried out over the last two years, together with proof of good completion for the most significant projects. These proof documents should indicate the amount, date and place of the work carried out and state whether the work was carried out according to the rules of the art and regularly completed to a satisfactory standard,
— a description of the tools and technical equipment that the candidate will have at their disposition for the performance of the procurement contract,
— a description of the technical equipment and the means used by the candidate to ensure quality, as well as the means of study and research that their company has at their disposition,
— certificates provided by official institutes or services responsible for quality control and authorized to approve the compliance of the supplies by using certain technical specifications. However, other proof of equivalent means of guaranteeing quality produced by the candidates will be accepted, if they do not have access to such certificates or are unable to obtain them in the imposed timeframe.
Afficher plus Conditions de participation
Conditions de participation (capacités techniques et professionnelles):
“A supplier which has already manufactured a similar equipment, with customers in the Oil&Gas sector or in the Chemical sector, with a particular knowledge...”
Conditions de participation (capacités techniques et professionnelles)
A supplier which has already manufactured a similar equipment, with customers in the Oil&Gas sector or in the Chemical sector, with a particular knowledge about European regulation 97/23/EG and 2015/68 (example of file to provide), French regulation NF-C-15-100 and CE marking.
Procédure Type de procédure
Procédure concurrentielle avec négociation
Informations sur la réduction du nombre de solutions ou d'offres au cours de la négociation ou du dialogue
Recours à une procédure par étapes pour réduire progressivement le nombre de solutions à discuter ou d'offres à négocier
Informations sur les négociations
Le pouvoir adjudicateur se réserve le droit d'attribuer le marché sur la base des offres initiales sans mener de négociations
Informations administratives
Délai de réception des offres ou des demandes de participation: 2018-12-18
16:00 📅
Date estimée d'envoi des invitations à soumissionner ou à participer aux candidats sélectionnés: 2019-01-11 📅
Langues dans lesquelles les offres ou les demandes de participation peuvent être présentées: français 🗣️
Langues dans lesquelles les offres ou les demandes de participation peuvent être présentées: anglais 🗣️
Informations complémentaires Organe de révision
Nom: Tribunal Administratif de Cergy Pontoise
Adresse postale: 2-4 Boulevard de l'Hautil — BP 30322
Commune postale: Cergy Pontoise
Code postal: 95027
Pays: France 🇫🇷
Téléphone: +33 130173400📞
Courrier électronique: greffe.ta-cergy-pontoise@juradm.fr📧 Organisme responsable des procédures de médiation
Nom: Tribunal Administratif de Cergy Pontoise
Adresse postale: 2-4 Boulevard de l'Hautil — BP 30322
Commune postale: Cergy Pontoise
Code postal: 95027
Pays: France 🇫🇷
Téléphone: +33 130173400📞
Courrier électronique: greffe.ta-cergy-pontoise@juradm.fr📧 Service auprès duquel des informations sur la procédure de recours peuvent être obtenues
Nom: Tribunal Administratif de Cergy Pontoise
Adresse postale: 2-4 Boulevard de l'Hautil — BP 30322
Commune postale: Cergy Pontoise
Code postal: 95027
Pays: France 🇫🇷
Téléphone: +33 130173400📞
Courrier électronique: greffe.ta-cergy-pontoise@juradm.fr📧
Source: OJS 2018/S 224-512186 (2018-11-16)
Avis d'attribution de marché (2020-01-23) Pouvoir adjudicateur Nom et adresse
Nom: IFP Énergies Nouvelles
Objet Champ d'application du marché
Titre:
“Procurement, installation and commissioning of a parallezide (8 reactors) hight throughput heat treatment device
437577-18-TEC-SOL”
Brève description:
“Procurement of 1 simple and robust high temperature treatment tools making it possible to thermally parallelize quantities (8 times of 1 to 10 g in a single...”
Brève description
Procurement of 1 simple and robust high temperature treatment tools making it possible to thermally parallelize quantities (8 times of 1 to 10 g in a single autonomous system) of heterogeneous solid catalysts under different gases and / or vapour before their catalytic evaluation. Heat treatments conventionally carried out in the laboratory: treatment of the catalysts in fixed bed where the gas is forced to go through the catalytic bed will therefore be preferred.
Temperature range: 100 to 750 C.
Gas feed: Air, N2, mix of air and N2, H2.
Gas feed flow per 8 reactors: 8 to 200 NL/h +/-5 %.
Liquid feed type: Water, chlorination compound (1,2-Dichloropropane), alcohol(propan-2-ol).
Liquid feed flow range for 8 reactors: 0,5 to 10 g/h for all 8.
Maximum dimensions of the tool: Deep < 900 mm, width < 2 800 mm, height < 3 000 mm.
Maximum weight: 800 kg/m.
Afficher plus
Valeur totale du marché (hors TVA): EUR 442 510 💰
Description
Site principal ou lieu d'exécution:
“IFP Énergies Nouvelles
Établissement de Lyon rond-point de l'échangeur de Solaize
BP 3
69360 Solaize
France” Critères d'attribution
Prix
Informations sur les options
Description des options:
“1) An additional tool;
2) Individual reactor temp control: 1 set point per reactor (8 different set points);
3) High temperature range: 100 to 1000 C;
4)...”
Description des options
1) An additional tool;
2) Individual reactor temp control: 1 set point per reactor (8 different set points);
3) High temperature range: 100 to 1000 C;
4) Individual gas flow: 1 to 25 NL/h +/-5 %;
5) Small quantity of liquid in gas feed: to ensure the injection, the division into equal quantity and the vaporization: 3μL of a liquid in the gas feed for 2g of catalyst;
6) Liquid feed flow range #2 for 8 reactors: 10 to 50g/h for all 8.
Procédure Informations administratives
Publication précédente concernant cette procédure: 2018/S 224-512186
Attribution du marché
1️⃣
Titre:
“Procurement, installation and commissioning of a parallezide (8 reactors) hight throughput heat treatment device”
Date de conclusion du contrat: 2019-05-06 📅
Informations sur les appels d'offres
Nombre d'offres reçues: 2
Nom et adresse du contractant
Nom: Micromeritics Franc SARL
Commune postale: Mérignac
Pays: France 🇫🇷
Région: Gironde🏙️
Le contractant est une PME
Information sur la valeur du contrat/lot (hors TVA)
Valeur totale du contrat/lot: EUR 442 510 💰
Informations complémentaires Organe de révision
Nom: Tribunal administratif de Cergy-Pontoise
Adresse postale: 2-4 boulevard de l'Hautil — BP 30322
Commune postale: Cergy-Pontoise
Organisme responsable des procédures de médiation
Nom: Tribunal administratif de Cergy-Pontoise
Adresse postale: 2-4 boulevard de l'Hautil — BP 30322
Commune postale: Cergy-Pontoise
Service auprès duquel des informations sur la procédure de recours peuvent être obtenues
Nom: Tribunal administratif de Cergy-Pontoise
Adresse postale: 2-4 boulevard de l'Hautil — BP 30322
Commune postale: Cergy-Pontoise
Source: OJS 2020/S 018-039326 (2020-01-23)